Removing The Crisper And Crisper Cover; Adjusting The Crisper Humidity Control; Removing The Snack Bin - Whirlpool ED25DQXDB00 Use And Care Manual

Removing the crisper and crisper cover
To remove the crisper:
1.
Slide crisper straight out to the stop.
2. Lift the front and slide out the rest of the way.
3. Replace in reverse order.
Pull
out to the stop, Ilft
the front, and pull again.
To remove the cover:
1.
Hold cover firmly with both hands and lift front of
cover off supports.
2. Lift cover out by pulling up and out.
To replace the cover:
1.
Fit back of cover into notch supports on walls of
refrigerator.
2. Lower front into place.
Remove the glass Insert.
Lift the cover front, then
the back.
NOTE: Handle glass
insert with care. It is
heavy.
Adjusting the crisper humidity control
(on some models)
You can control the amount of humidity in the mois-
ture-sealed crisper. Adjust the control to any setting
between LOW and HIGH.
l
LOW (open) lets moist air out of the crisper for best
storage of fruits and vegetables with skins.
l
HIGH (closed) keeps moist air in the crisper for best
storage of fresh, leafy vegetables.
Humidity Control
nwl~~.~.LOW
-
Removing the snack bin
To remove the snack bin:
1.
Slide snack bin straight out to the stop with an even,
constant motion.
2. Lift the front.
3. Slide bin out the rest of the way.
4. Replace in reverse order.
2
il
Pull out to the
stop, Ilft the front,
and pull again.
12