Exterior Moisture Control; Adjusting The Refrigerator Shelves; Removing And Adjusting The Freezer Shelves; Removing The Freezer Door Shelves - Whirlpool ED25PW Use & Care Manual

Using Your Refrigerator
Continued
Glass
shelves are
heavy. Be careful.
Exterior moisture control
The Exterior Moisture Control on the Control
Console operates electric heaters around the door
openings. These heaters help keep moisture from
forming on the outside of the refrigerator.
1. Use the OFF setting when humidity is low.
2. Use the ON setting if moisture forms on the
outside of the refrigerator.
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way you use
your refrigerator. Glass shelves are strong enough
to hold bottles, milk and other heavy food items.
To remove glass shelves:
1. Remove items from shelf.
2. Tilt up at front.
3. Lift up at back.
4. Pull shelf straight out.
To replace glass shelves:
1. Guide the rear hooks into the slots in the
shelf supports.
2. Tilt up front of shelf until hooks drop into slot.
Lower front of shelf to level position.
Removing and adjusting the
freezer shelves
To remove the shelves:
1. Lift right side of shelf off supports.
2. Slide shelf out of shelf support holes.
3. Replace in reverse order.
To adjust the shelves:
1. Remove shelf as above.
2. Remove supports by sliding upward.
3. Relocate supports on desired level.
4. Replace shelf.
NOTE: The cup shaped supports go in the back
of the freezer.
Removing the freezer door shelves
(ED22PW)
Shelves can be removed for easier cleaning.
To remove door shelves:
1. Grasp shelf at both ends.
2. Lift up and pull out.
To replace door shelves:
1. Insert shelf hooks into guides on both sides.
2. Push down to lock in place.