Andcovers; Adjusting The Crisper Humidity Control; Adjusting The Meat Drawer Temperature - Whirlpool ED25PW Use & Care Manual

..-
Pull
out to the stop,
Remove the
glass insert, I I
lift the frame from
then the back.
II
Removing the crisper, meat drawer
and covers
To remove the crisper or meat drawer:
1. Slide straight out to the stop.
2. Lift the front.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the covers:
1. Push up glass insert from bottom, then slide
out with both hands.
2. Lift front of cover frame.
3. Lift out cover frame by pulling up and out.
4. Remove metal support cover.
To replace the covers:
1. Replace metal cover support on wall supports
in front section of cabinet.
2. Fit back oi corner into notch supports on walls
of refrigerator, then lower into place.
3. Slide back of glass insert into place, then
lower front.
Adjusting the crisper humidity control
You can control the amount of humidity in the
moisture-sealed crisper.
1. The control can be adjusted to any setting
between LOW and HIGH.
2. LOW (open) lets moist air out of the crisper for
best storage of fruits and vegetables with skins.
3. HIGH (closed) keeps moist air in the crisper for
best storage of fresh leafy vegetables.
Adjusting the meat drawer temperature
Cold air flows against the meat drawer through an
opening between the freezer and the refrigerator.
This helps keep the meat drawer colder than the
rest of the refrigerator.
Slide the control to let more or less cold air
through.
7