Using Your Refrigerator
Continued
Removing
the snack
bin (ED25PW)
To remove
the snack bin:
1. Slide snack bin with an even, constant motion
straight out to the stop.
2. Lift the front.
3. Slide bin out the rest of the way.
4. Replace in reverse order.
Pull
out to the stop,
lift the front and
pull again.
Ii III
Ii
Meta! clips
Adjusting
the shelf glide
The shelf glides can be used to secure odd
shaped items or to separate other items.
1. Grasp glide.
2. Slide glide along guide.
Shelf glide cannot be removed.
Removing
the freezer
basket
(Wire for ED25PW and plastic
for ED22PW)
For proper air movement, keep the freezer basket
in place when the refrigerator is operating.
To remove
the basket:
1. Slide the basket out to the stop.
2. Lift front to clear the stop.
3. Slide out the rest of the way.
To replace
the basket:
1. Place basket on the slides.
2. Make sure the stops clear the front of the slides.
3. Slide basket in.
Removing
the base grille
To remove
the grille:
1. Open the doors.
2. Pull grille out.
3. Do not remove
Tech Sheet fastened
behind grille.
To replace
the grille:
1. Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3. Close the doors.
See cleaning instructions for defrost pan and
condenser coils on page 14.
defrost pan
8