Canned Measurement Example - Ladybug PowerSensor+ LB480A Product Manual

Models LB480A/LB680A USB PowerSensor+™
Product Manual PPA (Pulse Profiling Application)

Canned Measurement Example

Shown below is Gate A measuring Pulse power, Peak power and Crest Factor by clicking on the Power Set from the
choice of three canned or group measurements. Right-click on the gate to see the measurement list or click the down
arrow on the toolbar.
NOTE: You can always highlight the span if you drag the cursor over the Panorama view (or select a highlight span
percentage and start time) even if you are in markers or gates mode. To highlight in the Measurement view you must
be in the highlight mode. If you do not switch to highlight mode before clicking/dragging in the Measurement view you
may inadvertently reposition markers or gates.
Revision: 08/02/11
40