Ladybug PowerSensor+ LB480A Product Manual page 32

Models LB480A/LB680A USB PowerSensor+™
Product Manual PPA (Pulse Profiling Application)
With these additional calculations we now have sufficient information to make proper pulse measurements. We can
calculate the peak, droop, pulse power, and pulse width. These pulse measurements often represent a starting point
for other measurements such as PRFand PRT. The Pulse Criteria dialog box is shown below with the default value of
6 dB.
NOTE: The Pulse Criteria definition stated above applies to data used in both marker and time gated measurements.
Revision: 08/02/11
32