Example Of A Profinet Io Configuration - Siemens SIMATIC S7-400 Configuration And Use Manual

Interfaces, Networks and Data Communication for the S7-400
Table 5-3
Transmission medium
Cable length between network components
or between terminals and network
components
Standard

Example of a PROFINET IO Configuration

Figure 5-5 shows an example of a PROFINET IO configuration with devices from
the SIMATIC S7, SIMATIC S5 and ET 200 series.
S7-400 with CP 443-1
Advanced as IO controller
ET 200B
Figure 5-4 Example of a PROFINET IO configuration
5-10
Characteristics of PROFINET IO, continued
Programming device
as IO supervisor
ET 200M
ET 200B
Shielded two-wire cables or
fiber-optic cables (glass or plastic)
Two-wire cable: Max. 100 m
Multimode fiber-optic cable: 3000 m
Monomode fiber-optic cable: Max. 26 km
PROFINET according to IEC 61158
ET 200S
PROFINET IO
ET 200M
PROFIBUS DP
Automation System S7-400 Configuration and Use
IE/PB Link
PN IO
A5E00442711-02