Configuration Of The Io-Link Master - Siemens SIMATIC S7-1500 Manual

4 Installation and Commissioning
4.3.4

Configuration of the IO-Link Master

Before you start operating the application, the following steps are necessary to
commission the RF200 IO-Link reader.
Table 4-5
No.
1.
2.
3.
Read/write data with IO-Link
Entry ID: 73565887, V3.4,
In the TIA Portal, open the Device configuration of the PLC_S7_1500 station.
Open the properties of the CM 4xIO-Link module and activate a new potential
group.
"Properties" > "Potential group"
Move your mouse pointer over the CM 4xIO-Link module.
Open the dialog window with the right mouse-button and click on "Start device
tool".
06/2022
Action
24