Using The Ice Cube Trays; Using The Optional Automatic Ice Maker - Whirlpool 4YED27DQDN00 Use And Care Manual

Using the ice cube trays
(on some models)
If cubes are not used, they may shrink. The
moving cold air starts a slow evaporation.
The longer you store cubes, the smaller
they get.
To remove ice:
1.
Hold tray at both ends.
2. Twist slightly.
Using the optional automatic ice maker
If your refrigerator has an automatic ice
maker, or if you plan to add one later
(contact the dealer for ice maker kit num-
ber), here are a few things you should know.
l
The ON/OFF lever is a wire signal arm.
DOWN to make ice automatically
UP to shut off the ice maker
IMPORTANT: Do not turn ice maker on
until you connect it to the water supply.
l
If you remove the ice bin, raise the signal
arm to shut off the ice maker. When you
replace the bin, push it in all the way and
lower the ice maker signal arm to the
ON position.
l
Good water quality is important for good
ice quality. Try to avoid connecting the ice
maker to a softened water supply. Water
softener chemicals (such as salt from a
malfunctioning softener) can damage the
ice maker mold and lead to poor ice
quality. If you cannot avoid a softened
water supply, make sure the water soft-
ener is operating properly and is well
maintained.
UP to
stop ice
maker.
DOWN to
start ice
maker.