Removing The Crisper And Crisper Cover - Whirlpool 4YED27DQDN00 Use And Care Manual

To reinstall shelf:
1. Hold shelf at front and back.
2. Tilt front of shelf up to a
45"
angle to
track.
3. Insert both rear shelf slides into upper
channel of track.
4. Lower front of shelf to a level position.
NOTE: Make sure both rear shelf slides are
securely in the track before letting go of
shelf.
Insert rear shelf slides into
upper channel of track.
Removing the crisper and crisper cover
To remove the crisper:
1.
Slide the crisper straight out to the stop.
2. Lift the front slightly.
3. Slide out the rest of the way.
4. Replace in reverse order.
Style 1
To remove the cover:
1. Hold cover firmly with both hands and lift
front of cover off supports.
2. Lift cover out by pulling up and out.
To replace the cover:
1. Fit back of cover into notch supports on
walls of refrigerator.
2. Lower front into place.
Pull out to
the stop, lift
the front,
and pull
again.
Lift the
cover
front, then
the back.
Style 2
To remove the cover:
1. Push up glass insert from the bottom,
then slide out with both hands.
2. Lift front of cover frame.
3. Lift cover frame up and out.
To replace the cover:
1. Fit back of cover frame into notch sup-
ports on walls of refrigerator, then lower
front into place.
2. Slide back of glass insert into place, then
12
lower front into place.