Displayed System Pressure
insert the value for desired pressure of the system
i.
Press ENTER, and keep pressed till it will be displayed "Done.............".
j.
Displayed System Start
Press + or - to change the value (ON/OFF):
a.
ON to active the pump
OFF not to active the pump
Press ENTER, and keep pressed till it will be displayed "Done.............".
b.
Displayed Save & Exit With ENTER
a.
Displayed Saving Parameter and the DONE All the paramenters are saved in
permanent memory.
Warnings: IF System Start = ON, HydroController immediately
User guide HC - Copyright © 2008 MAC3. All right reserved.
Via Baldanzese, 149 50041 Calenzano FI
Tel. 055 8877672 - Fax 8877068
www.mac3.it - e-mail: mac3@mac3.it
3,50 Bar
OFF
powers the electro-pump!
Man 01
Disegno 6328
English
15