Appendix - Accessories - Riello RX 360 S/PV Modulating Operation

A

Appendix - Accessories

Output power regulator kit for modulating operation
With the modulating operation, the burner continually adapts the
power to the heat request, ensuring a high level of stability for the
parameter controlled: temperature or pressure.
Two components should be ordered:
– the output power regulator to be installed on the burner;
– the probe to be installed on the heat generator.
Burner
RX 360 S/PV
Burner
RX 360 S/PV
Gas trains in compliance with EN 676
Please refer to manual.
Software diagnostics kit
Burner
RX 360 S/PV
A special kit is available that, by an optical link to a PC, shows the
burner life together with operating hours, type and number of
lockouts, no. of motor rpm's and safety parameters.
To view diagnostics, proceed as follows:
 connect the kit (supplied separately) to the appropriate
socket on the control box. Reading of the information begins
when the software programme included in the kit starts.
The installer is responsible for the addition of any
safety device not foreseen in this manual.
WARNING
20068189
Appendix - Accessories
Output regulator
RWF50.2
Probe Adjustment field
PT 100 temperature
Pressure 4 ÷ 20 mA
Pressure 4 ÷ 20 mA
Pressure 4 ÷ 20 mA
Code
20044365
Code
20086840
- 100 ÷ 500° C
0 - 2.5 bar
0 - 16 bar
0 ÷ 25 bar
32 GB
Code
3010110
3010213
3010214
3090873