Install The Storage Enclosure - Lenovo ThinkAgile CP Series Upgrade Manual

Install the storage enclosure

Procedures for installing ThinkAgile CP storage enclosure in a rack.
To install the ThinkAgile CP storage enclosure on the slide rails, do the following:
CAUTION:
Ensure that at least two people lift and install the enclosure together.
Step 1. Remove both of the side covers on the enclosure by grasping and pulling out the bottom of each
side cover, and then pulling it straight up.
Figure 13. Removal of side cover
Step 2. Lift the enclosure and slowly place the enclosure on the rail.
.
Chapter 3 Storage block capacity upgrade
43