Install the ThinkAgile CP storage block
Procedures for installing ThinkAgile CP storage block in a rack.
To install the ThinkAgile CP storage block in a rack, you must do the following:
1. Unpack the storage block box and check the contents
2. Install the slide rails in the rack
3. Install the storage enclosure
Firstly, unpack the storage block box and check the contents:
• One storage block
• One storage slide rails box:
– One left slide rail
– One right slide rail
– Six M5 screws
– Eight screws for square hole rack
• Two Category 5e patch cables
• Eight Category 6 patch cables
• Eight SFP+ 10 GbE transceivers
Note: If any of the slide box items are missing or are damaged, contact your place of purchase.
Figure 9. ThinkAgile CP storage slide box contents
.
Chapter 3
Storage block capacity upgrade
37