Lenovo ThinkAgile CP Series Upgrade Manual page 50

Storage capacity
Hide thumbs Also See for ThinkAgile CP Series:
Table of Contents

Advertisement

Step 6.
Secure the rear mounting bracket of the rail with two M5 screws.
Step 7.
Extend the rail until the front mounting bracket of the rail reaches the front rack.
Step 8.
Repeat steps 1 through 5 to install the front rail mounting bracket to the front mounting flange.
Attention:
• For the front mounting bracket, the screws for square hole rack need to be fastened in the same
holes as the preinstalled screws for round hole rack. Otherwise, the storage enclosure cannot be
secured to the front mounting bracket.
• After fastening the two screws for square hole rack, do not further secure the front mounting
bracket of the rail with screws until you install the storage enclosure into the rack.
Step 9.
Repeat steps 1 through 8 to install the opposite rail in the rack.
The installation of the storage block slide rails in a square hole rack is now complete.
The next step is to install the storage enclosure: Install the storage enclosure
42
Lenovo ThinkAgile CP Storage Capacity Upgrade Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinkagile cp4000Thinkagile cp6000

Table of Contents