Omron NA Series Practices Manual page 28

5-2-2 Installation to Screen
This IAG Collection assumes the following usage.

When the button for the ETAP device on the DLR SuperVisor, which is displayed by the
IAG "EtherNet_IP_Network Monitor" located on another page, is pressed, the screen
switches to the page with this IAG and then this IAG accesses to the device to receive
and display the necessary information.

When you press the EIP Monitor button in this IAG, the screen switches to the previous
page, where the IAG "EtherNet_IP_NetworkMonitor" is placed.
Do the following work when making this design.
 Events and Actions settings for IAG "EtherNet/IP NetworkMonitor"
Set the action "ShowPage" for the event "SelectETAP" in the IAG
"EtherNet_IP_NetworkMonitor" and enter the page name in which this IAG is placed.
Event
SelectETAP
 Property Assignment for IAG "EtherNet/IP NetworkMonitor"
Assign the following properties (Input/Output) of IAG "EtherNet/IP NetworkMonitor" to the
following variable.
Property (Input/Output)
SelectDeviceIPAddress
 Property Assignment for IAG "DLR Monitor"
Assign the following properties (Input/Output) of this IAG to the following variable.
Property (Input/Output)
SelectDeviceIPAddress
The IP address information is shared by this operation.
28
Description
Executed when an ETAP device is selected.
Description
IP address of the displayed unit
Description
IP address of the displayed unit
Enter the name of
the page where the
IAG is placed.
Variable Name Data Type
SelectDeviceAddress String
Variable Name Data Type
SelectDeviceAddress String