Advertisement
© 2014 TE Connectivity family of companies
All Rights Reserved
*Trademark
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
Battery Operated Hydraulic
Crimping Tools
1213875-[ ] and 1976505-[ ]
IMPORTANT SAFETY INFORMATION
TOOLING ASSISTANCE CENTER 1-800-722-1111
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com
Instruction Sheet
408-10231
25 MAR 14 Rev D
1 of 5
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for TE Connectivity 1213875 Series
Summary of Contents for TE Connectivity 1213875 Series
- Page 1 All Rights Reserved PRODUCT INFORMATION 1-800-522-6752 For latest revision and Regional Customer Service, *Trademark visit our website at www.te.com TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
-
Page 2: Installation
408-10231 Dimensions on this document are in metric units “C”-Head NOTE [with U. S. customary units in brackets], unless otherwise specified. Figures and illustrations are for reference only and are not drawn to scale. 2. DESCRIPTION (Figure 1) Main components of Battery Operated Hydraulic Crimping Tools 1213875-[ ] and 1976505-[ ] include a “C”-Head, which houses the stationary die;... - Page 3 408-10231 Figure 3 Rev D 3 of 5...
-
Page 4: Inspection & Maintenance
408-10231 1. Insert terminal or splice in the stationary die Additionally, inspect and service the head (as according to the instructions packaged with the described in Figure 4) every month or 1,000 cycles, dies. whichever comes first. Refer to Figure 1. 2. - Page 5 408-10231 ITEM TO BE INSPECTED INSPECTION/PROBLEM POSSIBLE SOLUTION Inspect for cracks, gouges, nicks, or galling Return tool for repair (see Section 6, on the “C”-Head or where the “C”-Head RETURN/REPAIR). contacts dies. “C”-Head Check to see if the upper die retaining pin Return tool for repair (see Section 6, does not hold the stationary die in place.
Need help?
Do you have a question about the 1213875 Series and is the answer not in the manual?
Questions and answers