Toshiba PA912 Instruction Manual page 79

3
Registration of Network variables (Slave I/O:Output)
Select "PA912-NM" of Talker Node, and click [Open Network Variables]
button.
In the Network Variables screen, make settings for Variable, Data type,
Comment (optional), I/O Speed and Task.
Figure 3-48 Network variables screen(Slave I/O:Output)
4
Registration of Network variables (Slave I/O:Input)
Select "PF_X" of Talker Node, and click [Open Network] button.
In the Network Variables screen, make settings for Variable, Data type,
Comment (optional), I/O Speed and Task.
A variable is chosen after setting a In node as PA912-NM, and it clicks [Assign
to Inputs], and registers with the input variable of PA912-NM.
Figure 3-49 Network variables screen (Slave I/O:Input)
3.3 Setting with the Engineering Tool
Unified Controller nv series PROFIBUS(PA912) Module Instruction Manual
67