Toshiba PA912 Instruction Manual page 31

3
Install the PA912 module to each of the base units.
(1)Hook the module to the slot on the bottom of the module in the lower part
of the base unit, and rotate it to fit the connector.
(2)Secure it to the base unit with the fixing screw on the top of the module.
(2)
(1)
Figure 2-3 Installing the module
4
Check before the operation.
Before turning on the power to operate the product, check again that the
switch setting, installation, and wiring are as described in this operation
manual.
Base unit
PA912 module
Unified Controller nv series PROFIBUS(PA912) Module Instruction Manual
2.2 Installing the Module
19