Toshiba PA912 Instruction Manual page 25

Chapter 2
Installation and Wiring
This chapter describes installation and wiring methods of the PA912 module.
Before installation and wiring, read this operation manual thoroughly.
2.1 Types of I/O Base Units
2.2 Installing the Module
2.2.1
2.2.2
2.3 Connecting the TC-net I/O Loop Transmission
Connector
2.4 Connecting the PROFIBUS Transmission Connectors ·
2.5 Replacing the Module
2.6 Removing the Base Unit
······················································· 16
······························································ 17
Vertical installation of the module ··································· 17
Horizontal installation of the module ······························· 20
················································································· 21
···························································· 24
······················································· 26
23
13