Toshiba PA912 Instruction Manual page 62

Chapter 3 Setting
3
50
6F8C1259
Specify import files.
In the configuration import screen, select the configuration information (a
file with an xml extension) saved by using the Anybus NetTool-PB, and click
the [OK] button.
Figure 3-22 Configuration import file designation screen
Note
・ Clicking on the [Add] radio button will import the newly added slave devices only. Thus, the
I/O variables for the registered slave devices remain available.
・ Clicking on the [Change] radio button will delete all the registered slave devices and import
new ones.