CARING FOR YOUR RANGE
L
-
IFT
UP COOKTOP AND SURFACE BURNERS
7.
To lower the cooktop, lift the cooktop from both
R
EMOVING THE OVEN DOOR
For normal use of your range, you do not need to
remove the door. However, if you have to remove
the door follow the instructions in this section.
NOTE:
If the door removal pins included in the
Anti-Tip Bracket Package are not available, nails or
screws may be used. Be careful that the length of
the nail or screw does not damage the oven by
chipping or scratching the porcelain surface.
To remove:
1.
Open the door about halfway. Insert door
2.
Close the door as far as the door removal pins
will let you.
28
sides while pressing the
support rods back to
unlock them. Lower the
cooktop into place.
removal pins into both
hinge hangers. Do not
remove them while the
door is removed from
the range.
.
CONT
(
)
8.
Replace the surface burner grates.
Insert door removal
pin here
Oven door
3.
Rotate the door toward the range. Lift up the
Range
Hinge
hanger
door until it stops. Do
not use the door handle
to lift the door. Rotate
the door toward the floor
and pull it toward you.