Baking/Roasting; Adjusting The Oven Temperature Control - Whirlpool TER20WOD Use And Care Manual

Baking/roasting
1. Position the rack(s) properly before
turning on the oven. To change rack
position, lift rack at front and pull out.
For further information, see "Positioning
racks and pans" on page 9.
2. Set the Oven Selector to BAKE.
3. Set the Oven Temperature Control Knob
to the baking/roasting temperature you
want. The OVEN HEATING Indicator
4.
5.
Light will come on. The oven is preheated
when the OVEN HEATING Indicator Light
first goes off.
NOTE: Do not preheat oven when
roasting or cooking items such as
casseroles.
Put food in the oven. During baking/
roasting, the elements will turn on and off
to maintain the temperature setting. The
OVEN HEATING Indicator Light will turn
on and off with the elements.
NOTE: The top element helps heat
during baking/roasting, but does not
turn red.
When baking/roasting is done, turn
both the Oven Selector and the Oven
Temperature Control Knobs to OFF. The
OVEN HEATING Indicator Light will
go off.
Adjusting the oven temperature control
Although your new oven is properly adjusted
to provide accurate temperatures, it may
cook faster or slower than your old oven.
If, after using the oven for a period of time,
you are not satisfied with the baking/roasting
results, you can change the temperature
calibration by following these steps:
12