Where To I Place My Station; What Is Distance | Resistance | Interference - La Crosse Technology S81120 Faqs

Advanced Installation Options
Some advanced installation options include tripods, wall mounts, eave cross mounts, chimney mounts,
and many others. Any of these can be combined with U-bolts for attachment onto a tall cylindrical conduit
using our Adjustable Base. Please note that these advanced options will require additional equipment and
possibly professional help for best results.
U-bolt Adapters
The illustrations above are not to scale and are for informative purposes onl y.
La Crosse Technology is not responsible for any damages or injury that may occur during installation.
Your station is designed for flexible placement on a desk or countertop, or to position on the
wall. When the stand is closed, it provides wall mounting holes.
• Position within reach of an outlet that is always active. Some outlets in living rooms and in
bedrooms may only be active when the light switch is on.
• This station must operate with the 5 volt power cord in order to receive sensor updates.
• Operation on battery power will only maintain time/date settings if you need to move your
station.
• Best reception occurs when only one wall is between your station and each sensor outside.
• Position you station six feet from other electronics and wireless devices. If you suspect RF
(radio frequency) interference, simply move your weather station a few feet.

WHAT IS DISTANCE | RESISTANCE | INTERFERENCE?

Distance:
• The maximum transmitting range in open air is over 330 feet (100 meters) between each
sensor and your station.
• Consider the signal path from your station to each sensor as a straight line.
• Consider the distance the station is from other electronics in the home.
Resistance:
• Each obstacle: walls, windows, vegetation, stucco, concrete, and large metal objects will
reduce the effective signal range by about one-half.
• Mounting your sensors on a metal fence can significantly reduce the effective signal range.
Interference:
• Consider electronics in the signal path between the sensors and your station.
• Simple relocation of the sensors or the station may correct an interference issue.
Tripod Setup

WHERE TO I PLACE MY STATION?

Chimney Mount
5 | P a g e