Do you have a question about the S85814 and is the answer not in the manual?
Questions and answers
Linda L McDiffitt
July 14, 2025
How many alerts are there. I push the button when it starts peeping to stop it. But it will start back up a little later. I like to know how to stop it for good. it just keeps it up.
1 comments:
Mr. Anderson
August 31, 2025
To stop the alerts on the La Crosse Technology S85814 permanently, you must go into the Alerts menu and turn off the specific alert. Disarming a sounding alert by pressing any button only stops it temporarily; it will reactivate unless turned off in the Alerts menu.
This answer is automatically generated
Richard H Gundrum
June 28, 2025
The light will not stay on.
1 comments:
Mr. Anderson
August 24, 2025
If the light on the La Crosse Technology S85814 does not stay on, check if the device is running on battery power. When using battery power only, the backlight is automatically set to OFF and will turn on for about 10 seconds when the Light button is pressed, then turn off again to save battery. To keep the light on, plug in the power cord. When plugged in, press and release the Light button to cycle through backlight options: HI, Low, and Off.
This answer is automatically generated
Acie Ellerbe
June 14, 2025
How do I restart my unit- outside sensor not found
1 comments:
Mr. Anderson
August 19, 2025
To restart the La Crosse Technology S85814 unit when the outside sensor is not found:
1. Bring the sensor inside and place it at least five feet from the weather station. 2. Remove the batteries from both the sensor and the weather station. Also, unplug the weather station's power cord. 3. Press and release any button on the station at least 20 times. 4. Wait at least 15 minutes. 5. Insert new batteries into the sensor. 6. Insert new batteries into the weather station and reconnect the power cord. 7. Wait 1–2 minutes for the outdoor data to appear on the screen. 8. Wait another 15 minutes to ensure a strong connection. 9. Place the sensor back outside in a shaded location.
This answer is automatically generated
Brenda Miracle
August 25, 2025
How do I get the screen to stay on the lacrosse technology where it shows the time temperature and weather all day long
Wireless weather station with bluetooth speaker and atomic time & date (16 pages)
Summary of Contents for La Crosse Technology S85814
Page 1
Color Weather Forecast Station For online video support: http://bit.ly/LaxTechTalk Instructional Manual Model: S85814 DC:072216 Protected under U.S. Patents: 5,978,738 | 6,076,044 | RE43903...
Atomic Time .......... Mount outdoor Sensor ......Position Display ........Visit Us on Social Media ......Care and Maintenance ......Warranty and Support ......Specifications ......... FCC Statement and Canada statement ..S85814 Color Weather Forecast Station Page | 2...
Settings order: 1. Beep 7. Minutes 2. Atomic Time 8. Year 9. Month 3. Time Zone 4. Daylight Savings Time 10. Date 11. Fahrenheit/Celsius 5. 12 | 24 Hour Time 6. Hours S85814 Color Weather Forecast Station Page | 4...
5. 12 | 24 Hour Format 8. Year 9. Month 10. Date 11. Fahrenheit | Celsius Note: The day of the week is automatically set after Year, Month, and date are specified S85814 Color Weather Forecast Station Page | 5...
Alert Sounds • When alert value is reached, the display will beep for 5 seconds (1 beep per second) each minute until out of alert range. • To silence alarm press any button S85814 Color Weather Forecast Station Page | 6...
Note: HI/LO records reset automatically at midnight. HI Record LO Record OUTDOOR OUTDOOR HUMIDITY HUMIDITY LEVEL LEVEL INDOOR INDOOR HUMIDITY HUMIDITY Heat Index Dew Point OUTDOOR OUTDOOR HUMIDITY HUMIDITY LEVEL LEVEL HUMIDITY HUMIDITY S85814 Color Weather Forecast Station Page | 7...
12 hours with 70-75% accuracy. Forecast Tendency Arrows Up Arrow: Pressure is rising. Down Arrow: Pressure is falling. Weather is expected to improve. Weather is expected to worsen. S85814 Color Weather Forecast Station Page | 8...
• The strength signal icon will animate until the sensor signal is received, or for 3 minutes if no signal available. Low Battery by Outdoor Temperature, replace batteries in the sensor. by Indoor Temperature, replace batteries in the display. S85814 Color Weather Forecast Station Page | 9...
• Choose a location 6 feet or more from electronics such as cordless phones, gaming systems, televisions, microwaves, routers etc. • Place within range of the outdoor sensor (300 feet open air). S85814 Color Weather Forecast Station Page | 10...
• Promptly remove expired batteries. Warranty and Support La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. Before returning a product, please contact our friendly customer support with questions or visit our...
6.88” W x 6.37” T x 1.33” D Display (17.5cm W x 16.2cm T x 3.4cm D) 1.57” W x 5.12” T x 0.79” D Outdoor Sensor (4.0cm W x 13.0cm T x 2.0cm D) S85814 Color Weather Forecast Station Page | 12...
Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. S85814 Color Weather Forecast Station Page | 13...
Need help?
Do you have a question about the S85814 and is the answer not in the manual?
Questions and answers
How many alerts are there. I push the button when it starts peeping to stop it. But it will start back up a little later. I like to know how to stop it for good. it just keeps it up.
To stop the alerts on the La Crosse Technology S85814 permanently, you must go into the Alerts menu and turn off the specific alert. Disarming a sounding alert by pressing any button only stops it temporarily; it will reactivate unless turned off in the Alerts menu.
This answer is automatically generated
The light will not stay on.
If the light on the La Crosse Technology S85814 does not stay on, check if the device is running on battery power. When using battery power only, the backlight is automatically set to OFF and will turn on for about 10 seconds when the Light button is pressed, then turn off again to save battery. To keep the light on, plug in the power cord. When plugged in, press and release the Light button to cycle through backlight options: HI, Low, and Off.
This answer is automatically generated
How do I restart my unit- outside sensor not found
To restart the La Crosse Technology S85814 unit when the outside sensor is not found:
1. Bring the sensor inside and place it at least five feet from the weather station.
2. Remove the batteries from both the sensor and the weather station. Also, unplug the weather station's power cord.
3. Press and release any button on the station at least 20 times.
4. Wait at least 15 minutes.
5. Insert new batteries into the sensor.
6. Insert new batteries into the weather station and reconnect the power cord.
7. Wait 1–2 minutes for the outdoor data to appear on the screen.
8. Wait another 15 minutes to ensure a strong connection.
9. Place the sensor back outside in a shaded location.
This answer is automatically generated
How do I get the screen to stay on the lacrosse technology where it shows the time temperature and weather all day long