• YEAR: Current year January 1-December 31 total. Example: current is date is Nov. 10, 2018.
Year rain is Jan 1, 2018 –Oct 31, 2018 month totals, plus the current month (Nov 1-10) rain.
Current Year will show in time display.
• TOTAL: Total rainfall since powered on or reset.
Reset Rain History: While viewing readings, hold the MINUS button to reset.
• When you add a Rain Sensor and switch to Rain mode, it will replace the Time/Date display.
• To return to Time/Date being display simply hold the RAIN & SET button together.
WHY ARE MY WIND CUPS NOT SPINNING?
•
Check for debris or ice preventing cups from moving.
•
Check mounting location. Look for obstructions that prevent the wind from reaching the
sensor.
•
In most cases, the wind sensor needs to be 4-6ft above the highest point on the roof in
order to clear nearby obstructions and read accurately.
•
A 50-foot clearance in all directions is best.
•
Push down firmly on the center of the cups to reseat them.
•
Cups are replaceable.
Occasionally, a bad storm with hail or debris that will damage your wind cups. These are easily
replaced.
Replace wind cups:
1. Loosen the screw on side of cups
2. Remove cups
3. Install new cups
4. Tighten screw
Note: The screw in the wind cups will fit on the flat side of the metal stem on the sensor.
WIND READING 0.00: WHY DO I ONLY SEE 0.00 FOR WIND
The 0.00 means your wind sensor is connected to your station.
•
Check that the cups spin freely. Something may be preventing movement.
•
Are your wind cups unbroken? After a storm it is good to check this.
HOW DO I VIEW MY TIME/DATE?
CAN I REPLACE MY WIND CUPS?
SPEED?
15 |
P a g e