KETRON SD 80 Instruction Manual page 94

Voice Edit
On the second Edit page you may set the
highest notes.
VELOCITY
Your may set the
each layer. In this way, the keyboard keys will play different sounds depending on the pressure on the keyboard
keys. If you set a fixed Velocity Key value, this value may be set in the
layer.
Finally, you may enable the
On the third page you may set for each layer the parameters of the
On/Off and speed), the parameters of
and Modulation wheel is applied), and the parameters of the
SLIDE
function is also available for the first three layers, where you may set the Threshold value, namely the
efficiency threshold of the slide.
https://www.ketron.it/images/ketron/Manuali_HTML/SD80/english/53_voice_edit.html[12/05/2020 19:56:47]
RANGE
key range in the same way by entering the minimum and maximum values for
SUSTAIN EXPRESSION
and
MODULATION
of the sound assigned to each layer by setting the lowest and
FIXED
pedal for the layer.
PORTAMENTO
(you may decide to which functions the Pitch Bend
PITCH AFTERTOUCH
and
box independently for each
effect (Portamento
. The