KETRON SD 80 Instruction Manual page 105

Preferences
VOL
: This is the virtual Volume knob of the metronome. Select this knob on the display to adjust the
metronome Volume with the Dial.
TIME SIGNATURE*/
you may set the tempo value. Simply select each box and modify the value with the Dial.
LINK/RUN MODE
by selecting the mode on the display and then using the Dial.
FREE RUN
external metronome.
synchronises the metronome tempo with that of the Midifile.
synchronizing it with the tempo of the Style.
ENABLE
may selected on the display.
BPM
: You may use the BPM to set the metronome speed with the Dial.
OUT
: Sets the output mode of the metronome. After selecting this function with the Dial you may set it on
"SOLO" mode that plays only the metronome through the headphones without music or other resources
generated by the SD 80 or on ALL mode where you will hear both the metronome and music through the
headphones.
TYPE :
Allows you to assign 3 different tones to the metronome click. Here again simply select the
function on the display with the Dial.
KINETICS MODE
-
SAVE
press the key on the panel and then select
BUZZER
- : When this function is ON you will hear a "beep" when you select a function on the display. When
this function is Off the "beep" is disabled. To save this setting press the
SAVE CUSTOM STARTUP
https://www.ketron.it/images/ketron/Manuali_HTML/SD80/english/39_preferences.html[12/05/2020 19:57:50]
and
: This box may be set in one of four different modes in the same way, namely
mode enables the metronome independently from the midifiles or Styles, just like an
Midifile
mode links the metronome to the Midifile you are playing, in other words it
: Enables or disables the metronome audio and therefore has
: This function allows you to scroll the screen with your fingers. To save this setting
TIME SIGNATURE/*
STYLE
SAVE CUSTOM STARTUP.
.
: These are two boxes in which
NONE
mode disables the metronome.
mode links the metronome to Style
ON OFF
and
SAVE
key on the panel and then select
modes which