KETRON SD 80 Instruction Manual page 51

DJ
second song which you can do by tapping the virtual pad 4 times. In this way, by beating 4 taps in time with the first
file, the second file will be synchronised with the first.
TAP
- : Opens a pad at the centre to synchronise the time with the "tapping" of your fingers
The Tap-Tempo function may be used only with files (Audio and Midi) whose original BPM is known; in the case
of midifiles this is always known but in the case of audio files (Wave or Mp3) you must indicate the BPM because
the instrument does not read it. The BPM of an Audio file must be indicated in the filename: if, for example, you
have a song called "name.mp3" at 120 BPM you should rename it "name@120.mp3". In this way the instrument will
have the reference BPM and takes it to the Tap Tempo function.
FX PAD
- : This works only with audio files and opens a small box with the following effects: Pitch, Cutoff and
Filter Resonance, and finally the tempo. These effects may be regulated with the corresponding sliders on the
instrument panel.
These effects may be regulated with the corresponding sliders on the instrument panel.
https://www.ketron.it/images/ketron/Manuali_HTML/SD80/english/17_dj.html[12/05/2020 19:50:22]