KETRON SD 80 Instruction Manual page 69

Edit Micro
corresponding key on the Front Panel. As previously mentioned, this function is used to talk and for obvious reasons
of comprehension it uses shorter reverbs with respect to those used when you are singing. If you need to interrupt
your singing performance to make an announcement for example, the Talk key allows you to have a suitable reverb
in the microphone immediately, which will be enabled while the Talk key is on. After this, the microphone effect
used for singing will then be restored.
In view of the fact that one of the 3 talk presets excludes the effect itself (No Efx) over the Talk effect, there is no
ON/OFF
to enable or disable it.
On the main screen of Edit Micro, if you press
preset. The display allows you to select the target destination (Select destination ) and assign a name to the preset
SAVE AS
with
new microphone preset).
https://www.ketron.it/images/ketron/Manuali_HTML/SD80/english/21_edit_micro1.html[12/05/2020 19:53:09]
(in this case the alphanumeric keypad is displayed on which you may enter the name of the
SAVE
on the panel you can save the microphone setup in a User