KETRON SD 80 Instruction Manual page 79

Midi
At the bottom you will find 6 virtual keys that provide access to new pages on which you may customise the Midi
sections or enable specific functions.
GM PART
- : Provides access to the control window of the 16 tracks called parts and to the 16 corresponding
Midi channels used during reception and transmission from the GM sound module built into the instrument.
ARRANGER KEYBOARD
-
corresponding Midi channels used during reception and transmission from the sound module built into the Arranger
of the instrument.
CLOCK IN
- : When this is enabled (yellow) the SD 80 accepts the Clock command from external Midi
appliances and may be synchronised with an external Sequencer / Controller.
CLOCK OUT
-
(Sequencer/Controller).
USB MIDI
- : Turns the USB Device port on the back panel into a Midi port for transmission and reception. In
this mode the Midi connection to sequencer software may be made directly using a USB cable without using the
Midi ports and traditional Midi cables.
MIDI PORT
-
The window displays 3 devices on the instrument and the respective connections to the Midi In and Midi Out ports.
Midi In 2 port is addressed exclusively to the Keyboard (Global).
Info: You can check an incoming MIDI activity thru Midi In Port by a led placed on EXIT button .
https://www.ketron.it/images/ketron/Manuali_HTML/SD80/english/35_midi.html[12/05/2020 19:54:37]
: When this is enabled (yellow), the SD 80 transmits the Clock to External Midi appliances
: Pressing this key opens a window to route the Midi ports
: Provides access to the control window of the sections and
STYLE
MENU