KETRON SD 80 Instruction Manual page 60

Save
an virtual alphanumeric keypad is displayed on which you may enter the new file name.
After entering the new name simply press
ENTER
If you press
you will write over the file. This is why the following message is displayed:
This message warns you that if you confirm by pressing
and the current User Style will be lost. The original factory styles can however not be deleted and will therefore
always be available. When you modify an original factory Style or save it with the same name, it will in any case be
saved in User Style mode without deleting the original Style.
In some menus like Footswitch, Accordion etc., the
corresponding menu. The save procedures are described in the section of this Manual relevant to the menu in
question.
https://www.ketron.it/images/ketron/Manuali_HTML/SD80/english/42_save.html[12/05/2020 19:52:03]
ENTER
without rewriting the name, the User Style or Registration will keep the current name and
Front Panel
on the alphanumeric keypad to save.
YES
the Registration or User Style will be overwritten
SAVE
key allows you to save specific functions on the