KETRON SD 80 Instruction Manual page 54

Controls
GLOBAL
- : Allows you to tune the SD 80 and modify Modulation sensitivity. To modify the tone, simply
TUNE
touch the box
way, to change modulation sensitivity, touch the box
knob and change the numeric value with the Dial.
AFTERTOUCH
-
by pressing a key on keyboard continuously even after pressing the note. The effect applied to the Aftertouch may be
a modulation, opening of a filter and even the volume. For example, by applying the volume to Aftertouch you can
simulate the sustained effect of a string or wind instrument which may increase the intensity of a note even after the
attack. On this page you may set the sensitivity of the Aftertouch response and the key pressure threshold under
which the Aftertouch effect must not respond. Here again, the modifications are introduced by selecting the box
SENSITIVITY
with the Dial.
EXPR.PEDAL
-
curve of the volume pedal may be set by selecting the box
POLARITY
-
THRESHOLD
-
VELOCITY CURVE
-
FIXED
- : Sets, using the dial, Fixed dynamic level on
AUX ASSIGN
-
following sections of the SD 80 (RIGHT, DRUM, BASS). Internal speakers are automatically excluded when this
out is connected.
https://www.ketron.it/images/ketron/Manuali_HTML/SD80/english/15_controls.html[12/05/2020 19:50:59]
or the corresponding virtual knob and change the numeric value with the Dial. In the same
: This is a parameter that many keyboards have today and allows you to modify a sound
THRESHOLD
and
: Enables the Expression pedal for volume control of Left and Style section. The response
: Allows you to select the polarity of the pedal switch to use (Normal Open / Normal Closed)
: Adjusts the opening threshold of the pedal controller to be used.
: Sets the keyboard dynamic response of SD 80 (Soft, Medium, Hard, Fixed).
: Allows you to assign to
Controls
MOD. SENSITIVITY
or the corresponding virtual knobs and modifying the value
PEDAL CURVE
HEADPHONE / SEPARATE OUT
or the corresponding virtual
and using the Dial.
one of the