The Oven Light - Whirlpool SF378PEW Use And Care Manual

Self-cleaning gas range
Table of Contents

Advertisement

The oven
light
The Oven Light will come on when you open
the oven door. To turn the light on when the
oven door is closed, push the Oven Light
Switch on the control panel. Push the switch
again to turn off the light.
Electrical
Shock Hazard
l
Make sure oven and light bulb are
cool and power to the range has been
turned off before replacing the light
bulb. Failure to do so could result in
electrical shock or burns.
*The bulb cover must be in place when
using the oven. The cover protects
the bulb from breaking, and from high
oven temperatures.
Because bulb
cover is made of glass, be careful not
to drop it. Broken glass could cause
injury.
To replace
the oven
light:
1. Unplug appliance or disconnect
at the
main power supply.
2. Remove the glass bulb cover in the back
of the oven by screwing it out counter-
clockwise.
3. Remove the light bulb from its socket.
Replace the bulb with a 40-watt appli-
ance bulb.
4. Replace the bulb cover by screwing it in
clockwise. Plug in appliance or recon-
nect at the main power supply.
NOTE: The oven light will not work during
the Self-Cleaning
cycle.
30

Advertisement

Table of Contents
loading

Table of Contents