Whirlpool SF367PEY Use And Care Manual page 26

The oven light
The oven light will come on when you open the
oven door.
Electrical Shock and
Personal Injury Hazard
l
Make sure oven and light bulb are cool
and power to the range has been turned
off before replacing the light bulb. Failure
to do so could resutt in electrical shock or
burns.
l
The bulb cover must be in place when
using the oven. The cover protects the
bulb from breaking, and from high oven
temperatures. Because bulb cover is
made of glass, be careful not to drop it.
Broken glass could cause injury.
To replace the oven light:
1. Unplug
appliance or
dieconnect
at the main
power supply.
2. Remove the glass bulb cover in the back of
the oven by pushing the wire holder to the side
and pulling out bulb cover.
3. Remove the light bulb from its socket.
Replace
the bulb with
a
40-watt appliance
bulb.
4. Replace
the bulb cover and
snap
the wire
holder into place.
Plug in
appliance or
reconnect
at the main power supply.
NOTE:
The oven light should not be used during
the Self-Cleaning cycle. Use during the Self-
Cleaning cycle will shorten the life of the bulb.
26