RAISE 3D E2 Quick Start Manual
  1. Manuals
  2. Brands
  3. RAISE 3D Manuals
  4. 3D Printers
  5. E2
  6. Quick start manual

RAISE 3D E2 Quick Start Manual

Hide thumbs Also See for E2:
Table of Contents

Advertisement

Quick Links

E2
3D Printer
Quick Start Guide
* Please review this entire guide before operating the printer.

Advertisement

Table of Contents
loading

Related Manuals for RAISE 3D E2

Summary of Contents for RAISE 3D E2

  • Page 1 3D Printer Quick Start Guide * Please review this entire guide before operating the printer.

  • Page 2: Table Of Contents

    Raise3D E2_Quick Start Guide CONTENTS Safety ........................... 1 Electromagnetic Compatibility - EMC ................2 Technical Specifications ....................4 Printer Components and Parts ..................6 Raise3D Supplies and Accessories ................10 Precaution and Hardware Installation................ 11 Software Installation ....................13 WLAN Connection ...................... 20 Maintenance ......................

  • Page 3: Safety

    Raise3D E2_Quick Start Guide Safety Warning: Indicates a potentially hazardous situation which, if not avoided, may result in injury or damage. Hot Nozzle: The hot nozzle sign indicates the presence of devices with high temperatures. Always use extra care when working around heated components. Always wear the heat resistant gloves provided in the Starter Box when working near the nozzle.

  • Page 4: Electromagnetic Compatibility - Emc

    Raise3D E2_Quick Start Guide Electromagnetic Compatibility - EMC ⚫ Simplified EU Declaration of Conformity Raise3D declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of the EU declaration of conformity is available at https://www.raise3d.com. CE Mark Warning This is a Class B product, in a domestic environment, may cause radio interference, in which case the user may be required to take adequate measures.
  • Page 5 Raise3D E2_Quick Start Guide ⚫ FCC Statement This device and its antenna must not be located or operated in conjunction with any other antenna and transmitter. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 6: Technical Specifications

    Raise3D E2_Quick Start Guide Technical Specifications ITEM Build Volume (W×D×H) Single Extruder Print Dual Extruder Print 13.0×9.4×9.4 inch /330×240×240 mm 11.6×9.4×9.4 inch / 295×240×240 mm CONSTRUCTION Machine Size (W×D×H) 23.9×23.5×18.3 inch / 607×596×465 mm Power Supply Input 100-240 V AC, 50/60 Hz 230 V @2A ELECTRICAL 24 V DC，350 W Power Supply Output...
  • Page 7 Raise3D E2_Quick Start Guide The firmware is based on RepRapFirmware (https://github.com/dc42/RepRapFirmware) The electronics inspired by Duet3D. DUET 2 WIFI and DUET 2 ETHERNET LICENSE The Duet WIFI/ DUET 2 WIFI and DUET ETHERNET are licensed under the terms of the CERL OHL 1.2 (see below or http://www.ohwr.org/attachments/2388/cern_ohl_v_1_2.txt for full text) will the following additional conditions: a.

  • Page 8: Printer Components And Parts

    Raise3D E2_Quick Start Guide Printer Components and Parts 1. Front Parts E. Touch Screen F. Power Saving Button A. Air Filter Box G. Filament Box B. Extruder C. Hotend H. Flexible Plate D. Platform Tray A. Air Filter Box Contains the air filter, which can filter out part of the harmful gas produced in the printing process. B.
  • Page 9 Raise3D E2_Quick Start Guide 2. Back Parts A. Electric Control F. Filament Exit System G. Filament Run-out Sensor B. Camera C. LED Light Bar H. Switching Power Supply D. Filament Holders I. Air Filter Fan J. Ethernet Port E. Input Power A.
  • Page 10 Raise3D E2_Quick Start Guide H. Switching Power Supply Switches from alternating current to direct current. Please be careful, it’s dangerous! Do not remove the power box without permission. Air Filter Fan Pulls air out of the machine through the air filter. Ethernet Port RJ45 port to connect the printer to a network.
  • Page 11 Raise3D E2_Quick Start Guide 3. Other Parts A. Z-axis Endstop Limit Switch B. Left Extruder B. Right Extruder C. X-axis Guide Rail C. X-axis Guide Rail D. X-axis Right Motor D. X-axis Left Motor E. Z-axis Right Motor E. Z-axis Left Motor A.

  • Page 12: Raise3D Supplies And Accessories

    Raise3D E2_Quick Start Guide Raise3D Supplies and Accessories Power Cable Hex Wrenches Filament Tweezers (×5) (×2) Heat Resistant Gloves Spatula Filament Nozzle Guide Tube Cleaning Kit (×2) (×1) Filament Holder USB Storage Fuse Filament Box Block (×4) (×4) 0.3 mm Feeler Gauge quick connector Plastic rivet (×2)

  • Page 13: Precaution And Hardware Installation

    • Noise (Acoustics) : <50dB(A) during printing NOTE: E2 printers may generate vibrations which depend mainly on the geometry of parts being printed and material characteristics. This will need to be taken into account if locating the printer near vibration sensitive equipment.
  • Page 14 Raise3D E2_Quick Start Guide ⚫ Hardware Installation and First Print Use hands to remove the Z-axis and X-axis locks. Please carefully store the removed locks, so that they can be installed again and used in subsequent transportation. The top foam contains five power cords of different standards.

  • Page 15: Software Installation

    Raise3D E2_Quick Start Guide Software Installation ⚫ ideaMaker Installation The slicing software, ideaMaker, is available on the USB storage device included with your printer. Additional downloads and versions are available online at: https://www.raise3d.com/download/ ➢ Open the installer and choose your preferred language. Select your preferred installation location for ideaMaker, and click "Next".
  • Page 16 Raise3D E2_Quick Start Guide ➢ Follow the instructions provided by the guide, and click "Install". After the installation is finished, click "Next" to go to the next step. ➢ Click "Finish" and ideaMaker is installed. - 14 - www.raise3d.com...
  • Page 17 Raise3D E2_Quick Start Guide Open the Disk Image for the ideaMaker installer. This is located in the USB storage device included with your printer. Alternatively, you can download the latest version from https://www.raise3d.com/download/. Next, drag the ideaMaker icon(left) into the Application folder on the right side. - 1 5 - www.raise3d.com...
  • Page 18 "Next". ➢ Select the diameter of your filament. Press "Finish" to finalize the initial settings. NOTE: ALL E2 printers use 1.75 mm filaments. - 16 - www.raise3d.com...
  • Page 19 Raise3D E2_Quick Start Guide ⚫ Using ideaMaker ➢ Click the "+" button to import "Giveaway Spinner" included in the USB storage device. ➢ Click the "Start" or " " button to begin slicing the model. - 17 - www.raise3d.com...
  • Page 20 Raise3D E2_Quick Start Guide ➢ Confirm your printer type and material are correct, then select the standard slicing template. Click "Edit" to select the type of Platform Addition and the type of Support. ➢ Click "Save and Close" to return to the previous menu. Click "Slice" to generate your file. - 18 - www.raise3d.com...
  • Page 21 Raise3D E2_Quick Start Guide ➢ Save the sliced files (.gcode and .data) by exporting them to the included USB storage device. NOTE: File names that do not conform to the Western Latin character set may not display properly. ➢ Confirm that the files are saved and eject the USB storage device. - 19 - www.raise3d.com...

  • Page 22: Wlan Connection

    Raise3D E2_Quick Start Guide WLAN Connection You can connect to a network by selecting the SSID and inputting the password. When the Wi-Fi module is manufactured, 2.4G is set at HT20, 5GHz is set at HT40. Note: The Wi-Fi’s frequency is fixed before being manufactured.

  • Page 23: Maintenance

    Raise3D E2_Quick Start Guide Maintenance The printers are pre-leveled at the factory, but we recommend verifying that the leveling has not changed during shipping. How to level up the X-axis: As shown in figure 1, click "Maintenance" to level up the X-axis and it will touch the top beam until horizontal.
  • Page 24 Raise3D E2_Quick Start Guide Take out the gauge from the Accessory Kit and insert it between the nozzle and the platform. Adjust the nozzle so that the distance between the nozzle and the printing platform exactly matches the thickness of the gauge (about 0.3 mm).

  • Page 25: Start Printing

    Raise3D E2_Quick Start Guide Start Printing Insert the USB storage device into the USB slot on the side of the touch screen. Select the "Print" tab, and choose "USB Storage". Select the file and check the printing parameters and settings. Press "Print" to start printing the test file During printing, you can check the status of your printing, including printing time and other...

  • Page 26: User Interface

    Raise3D E2_Quick Start Guide User Interface Home Status Menu and Settings button Extruder and heatbed Pause, Resume and Stop temperature button Current model name Visual display of the Total print time current model Current print status Taskbar Print height Tune Print parameters Utilities Choose the X/Y/Z axes...

  • Page 27: Experiencing Difficulties/Contact Information

    Raise3D E2_Quick Start Guide Experiencing Difficulties/Contact Information If you run into any issues during this guided setup, please contact our expert technicians by creating a ticket at support.raise3d.com. Customers outside of the US, please contact your local Raise3D distributor or reseller. For sales information please contact us at sales@raise3d.com.
  • Page 28 US Office 43 Tesla, Irvine, CA 92618, USA +1 888 963 9028 Netherlands Office Stationsplein 45 Unit A4.004 3013AK Rotterdam, the Netherlands China Office 4th Floor B5, 1688 North Guoquan Road, Yangpu District, Shanghai 200438 400 6367 888 (For the Mainland of China only)

Table of Contents