Related Manuals for RAISE 3D N-Series
Summary of Contents for RAISE 3D N-Series
- Page 1 N-Series 3D Printer Quick Start Guide * Please review this entire guide before operating the printer. N2 Plus...
- Page 2 / Quick Start Guide N-Series 3D Printer Unpacking Package Style: Wooden Case, Carton Case. 【Wooden Case】 Used for small quantity deliveries 【Carton Case】 Used for large quantity deliveries...
-
Page 3: List Of Parts
/ Quick Start Guide N-Series 3D Printer List of Parts Filament Feeder Z Ball Screws Fan(s) Nozzle(s) USB Storage & SD Card Slot Touch Screen GPIO Ports Power Inlet Print Bed Z-Stage Power Switch N2 Plus Filament Feeder Z Ball Screws... -
Page 4: Hardware Installation
/ Quick Start Guide N-Series 3D Printer Hardware Installation Cut the 5 zip ties that are securing the clips and the print head. Remove! (×5) Please remove the 12 clips holding the extruder assembly in place before power- ing on your printer. If you fail to remove these clips your printer will be damaged. - Page 5 / Quick Start Guide N-Series 3D Printer Hardware Installation (continued) Lift the build plate gently with your hands and remove the packaging material under the build plate. List of Contents Glass with Filament Nozzle Cleaning Kit Tweezers Filament Holder Protective Foam (×1/×2)
- Page 6 / Quick Start Guide N-Series 3D Printer Hardware Installation (continued) Mounting holes Plug in the power plug. Install the filament holder in the mounting hole on the side of the printer and place a spool of filament on the holder.
- Page 7 / Quick Start Guide N-Series 3D Printer Hardware Installation (continued) Remove! Glass with Protective Foam Remove the glass build plate from the Gently slide the glass plate on the build protective foam. plate. Make sure it snaps into the build plate clamps at the back.
- Page 8 / Quick Start Guide N-Series 3D Printer Install ideaMaker The ideaMaker software is available on the USB storage www.raise3d.com included with your printer. Or go to www.raise3d.com Download ideaMaker download the ideaMaker software. Windows Versions Open the installer and choose the language. Set a path for installing ideaMaker then...
- Page 9 / Quick Start Guide N-Series 3D Printer Install ideaMaker (continued) Follow the instructions and click "Install". After the installation has finished, click "Next" to move on the next step. Click "Finish" and ideaMaker is installed.
- Page 10 / Quick Start Guide N-Series 3D Printer Install ideaMaker (continued) Mac Versions Open the Disk Image for the ideaMaker installed on the USB storage included with your printer or that you downloaded from www.raise3d.com.
- Page 11 The first time you open ideaMaker you will need to select your printer model from the drop-down. Select the number of nozzles. Press "Continue" to move on to the next step. Select the diameter of the filament. Press "Done" to finish the initial settings. NOTE: The N-Series all use 1.75mm filament.
- Page 12 / Quick Start Guide N-Series 3D Printer Use ideaMaker Click the "Add" button to import a .stl Click the "Slice" button to begin the and .obj file. You can download a file slicing of the model. or use the test model included in the USB storage.
- Page 13 / Quick Start Guide N-Series 3D Printer Start first print Turn the printer on with the power button on the back of the printer. The printer will go through a start-up sequence. When the touch screen displays "Home", the printer is ready.
- Page 14 / Quick Start Guide N-Series 3D Printer Start first print (continued) The USB storage included with the printer comes loaded with already sliced models. They are a good place to start for your first print. Insert the USB storage into the USB slot on the side of the touchscreen.
-
Page 15: User Interface
/ Quick Start Guide N-Series 3D Printer User Interface · Status bar · Menu title, Settings Button · Extruder and Heated Bed Temperature · Current model name, total print time, current print status and height · Printing parameters and adjustment ·... - Page 16 Floor 4, Building B5, No.1600, North Guoquan Rd, Shanghai, China 200433 +86 21 65337855 2398 Walsh Ave, Santa Clara, CA, USA 95051 +1 888 963 9028 www.raise3d.com support@raise3d.com...