Table of Contents
Advertisement
1.9.c
Push the cover firmly against the nozzle so that both sides of the
cover snap into place over the tabs on the cell nozzle.
Step 1.9.c
1.10
If it is installed, remove the foam plug next to the black height setting knob on
the bottom of the cell:
Step 1.10
1.10.a
Turn the white width knob on the side of the cell clockwise to adjust
the setting to A.25.
©2015 Parata Systems, LLC
120-0465 Rev 03
page 9 of 40
Customer Guide
HPAC Cell Cleaning
Parata Technical Assistance Center
1-888-PARATA1 (727-2821)
Hide quick links:
Advertisement
Table of Contents
