Table of Contents
Advertisement
8.1
After the cell is set up and calibrated correctly, place new baffle covers on the
cell, one on each side of the baffle.
8.1.a
Position the baffle cover with the tab toward the top of the cell and
place it over the baffle.
8.1.b
Apply pressure to the outer edge of the baffle cover to secure it in
place.
Note
Step 8.1.b
©2015 Parata Systems, LLC
120-0465 Rev 03
New baffle covers must be installed to ensure proper air flow in
the cell.
Apply pressure to the outer edge of the baffle cover, indicated by
the dotted line.
page 33 of 40
Customer Guide
HPAC Cell Cleaning
Parata Technical Assistance Center
1-888-PARATA1 (727-2821)
Hide quick links:
Advertisement
Table of Contents
