Table Of Contents - Parata Mini Customer Manual

Table of Contents

Required Parts & Materials3
Estimated Time Required4
Procedure4
Prepare The Cell For Cleaning4
Close The Cell Door5
Remove The Pleated Breather5
Tab Location On The Breather5
Remove The Foam Breather6
Place The Nozzle Cover Back On The Cell8
Remove The Baffle Cover From Each Side Of The Cell10
Remove The Nozzle Splash Guard12
Install A Stem Cap14
Clean The Cell15
Drain The Excess Liquid From The Cell Into The Bag17
Prepare The Bag For Disposal18
Rinse The Cell19
Clean The Chute Assembly23
Install The Clean Chute Assembly23
Complete The Cell Drying Process24
Open The Cell Door24
Reassemble The Cell27
Inserting A New Pleated Breather28
Install A New Foam Breather28
If You Are Placing The Same Drug In The Cell32
If You Accidentally Deleted The Cell From The System32
If You Are Putting A New Drug In The Cell32
Cleaning The Chute34
Disassemble The Chute Assembly For Cleaning35
Reassemble The Chute36