Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Skywalk SALSA Series
Summary of Contents for Skywalk SALSA Series
- Page 1 SALSA Square Rescue Chute...
-
Page 2: Table Of Contents
At skywalk we are enthusiastic about wind sports and innovative technologies. Care When we founded skywalk in 2001, our goal was to make paragliders and kites that offer new solutions to set new impulses, and to provide customers with a maximum Repair of user friendliness. -
Page 3: Description
SALSA 2 DESCRIPTION 3 TECHNICAL DATA The SALSA is a modern cruciform reserve parachute that, thanks to its design, boasts Size a short opening time and a high pendulum stability. The large surface area ensures a Area (m²) 26,9 32,5 40,1 low rate of descent, while the symmetrical design prevents system-related forward Number of panels... -
Page 4: Operating Limits
SALSA 5 OPERATING LIMITS 7 CONNECT THE RESERVE CHUTE TO THE HARNESS > The SALSA has been specially developed for use as a reserve chute for paragliding. To connect the reserve chute to the V-line, you must use an oval screw shackle with at Any use for other flying sports such as parachuting, base-jumping etc. -
Page 5: Compatibility Test
Please contact your flight THE RESCUE SYSTEM MUST ALWAYS BE THROWN ON THE SIDE WHERE THE school or skywalk dealer to prepare for the initial installation. There you can find in most CONNECTING LINES OF THE HARNESS ARE LOCATED. - Page 6 SALSA PACKING PROCESS 3. The SALSA is a cruciform rescue parachute with four Follow the steps below to pack your rescue chute: corner points, so lay out the canopy with one corner at the 1. Use a piece of line to thread bottom, one on the left, one on the packing loops together.
- Page 7 SALSA 5. Now lay out the next panels in 7. Next, you will again encounter a rectangular fashion. They will rectangular panels until you be slightly easier to lay out. reach the next corner, which is now the uppermost and last one on this side.
- Page 8 SALSA 9. Now return to the channel and 11. You are done with the sorting of the run your hands along the con- panels necting points of the middle lines until they are free of the 12. so now you can inspect the middle line material.
- Page 9 SALSA 14 . Now place the reserve chute 16. Starting at the main riser, loop like a snake in the container, the line bundles in the shape of take care to use the full a figure-eight. Use silicone- length and width. based rubber rings to fix the line bundles.
-
Page 10: Maintenance
The metallic parts can be turned in at a metals recycling center. The best solution is to send your retired skywalk rescue directly to us. We will then take The rescue parachute has to be checked after deployment by a professional. Always seek care of recycling it. -
Page 11: Nature And Environmentally Compatible Behavior
17 CLOSING WORDS The skywalk SALSA is at the absolute leading edge of development in the market for square rescue systems. It cost us a lot of time to develop this rescue, but it was also a lot of fun. - Page 12 Skywalk GmbH & Co. KG Windeckstr. 4 | 83250 Marquartstein For great stories, awesome photos and adventures all over the globe – follow us on social media. +49 (0) 8641/69 48 40 Tag us and use #purepassionforflying to get featured! skywalk.paragliders...
Need help?
Do you have a question about the SALSA Series and is the answer not in the manual?
Questions and answers