Closing The Maintenance Compartment Door - Huawei SUN2000-90KTL Series User Manual

SUN2000-(90KTL, 95KTL, 100KTL, 105KTL) Series
User Manual
Figure 5-17 Connecting the power cable of the tracking system
(1) AC terminal block
(4) Power cable of the
tracking system
----End
Follow-up Operations
Check that the cable is connected correctly and securely. Then seal the cable gland. Clear the
foreign matter from the maintenance cavity.

5.9 Closing the Maintenance Compartment Door

Procedure
Step 1 Install the AC terminal cover and then install the support bar.
Step 2 Close the maintenance compartment door and tighten the two screws on the door.
Issue 10 (2020-03-28)
(2) OT/DT terminal of the AC output
power cable
(5) OT terminal of the power cable of
the tracking system
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
(3) AC output
power cable
-
62