Determining The Installation Position - Huawei SUN2000-90KTL Series User Manual

SUN2000-(90KTL, 95KTL, 100KTL, 105KTL) Series
User Manual
Category
PPE

4.3 Determining the Installation Position

Installation Environment Requirements







Issue 10 (2020-03-28)
Tool
Measuring tape
Heat gun
Safety gloves
The SUN2000 can be installed indoors or outdoors.
Do not install the SUN2000 near flammable or explosive materials.
Do not install the SUN2000 where its enclosure and heat sinks are easily accessible,
because the voltage is high and these parts are hot during operation.
The solar inverter will be corroded in salt areas. Before installing the solar inverter
outdoors in salt areas, consult Huawei. A salt area refers to the region within 500 meters
from the coast or prone to sea breeze. The regions prone to sea breeze vary with weather
conditions (such as typhoons and monsoons) or terrains (such as dams and hills).
Install the SUN2000 in a well-ventilated environment to dissipate heat.
When installed under direct sunlight, the power may be derated due to the temperature
rise. You are advised to install it in a sheltered place or install an awning over it.
The SUN2000 should be physically separated from third-party wireless communication
facilities and residential environments by distance greater than 30 m.
Copyright © Huawei Technologies Co., Ltd.
Bubble or digital
level
Cable tie
Safety goggles
Hydraulic pliers
Crimping tool
Model:
32.6020-22100-HZ;
manufacturer:
Staubli
Anti-dust respirator
4 Installation
Heat shrink tubing
Removal wrench
Model: 13001462;
manufacturer:
Staubli
Safety shoes
27