Installing The Mounting Bracket; Support-Mounted Installation - Huawei SUN2000-90KTL Series User Manual

SUN2000-(90KTL, 95KTL, 100KTL, 105KTL) Series
User Manual

4.4 Installing the Mounting Bracket

Before installing the mounting bracket, remove the security Torx wrench and save it for later
use.
Figure 4-9 Position for binding the security Torx wrench
(1) Position for binding the security Torx wrench
The SUN2000 mounting bracket has four groups of screw holes, each group containing four
holes. Mark any one hole in each group based on site requirements and mark four holes in
total. The two round holes are recommended.
Figure 4-10 Hole dimensions

4.4.1 Support-Mounted Installation

Prerequisites
The M12x40 bolt assemblies are delivered with the mounting bracket. If the bolt assembly
length does not meet the installation requirements, prepare M12 bolt assemblies by yourself
and use them together with the delivered M12 nuts.
Procedure
Step 1 Determine the positions for drilling holes using the mounting bracket. Level the positions of
mounting holes using a bubble or digital level, and mark the positions with a marker.
Issue 10 (2020-03-28) Copyright © Huawei Technologies Co., Ltd.
4 Installation
32