SUN2000-(90KTL, 95KTL, 100KTL, 105KTL) Series
User Manual
Step 2 Drill holes using a hammer drill. You are advised to apply anti-rust paint on the hole positions
for protection.
Step 3 Secure the mounting bracket.
Figure 4-11 Installing the mounting bracket
----End
4.4.2 Wall-Mounted Installation
Prerequisites
You have prepared the expansion bolts. M12x60 stainless expansion bolts are recommended.
Procedure
Step 1 Determine the positions for drilling holes using the mounting bracket. Level the positions of
mounting holes using a bubble or digital level, and mark the positions with a marker.
Step 2 Drill holes using a hammer drill and install expansion bolts.
Avoid drilling holes in the water pipes and power cables buried in the wall.
Issue 10 (2020-03-28)
Copyright © Huawei Technologies Co., Ltd.
4 Installation
33