Supermicro A+ Series User Manual page 73

• APOB Version
• APPB Version
PSP Directory Level 2 (Updateable)
• PSP Bootloader Version
• SMU FW Version
• ABL Version
• APCB Version
• APOB Version
• APPB Version
Trusted Computing

Security Device Support
If this feature and the TPM jumper on the motherboard are both set to Enabled, onboard
security devices will be enabled for TPM (Trusted Platform Module) support to enhance data
integrity and network security. Please reboot the system for a change on this setting to take
effect. The options are Disable and Enable.
TPM State
This software switch will enable or disable the installed security device. The options are
Disable and Enable.
Pending Operation
This feature wil schedule an operation for the the security device, select TPM Clear to clear
any pending operation. The options are None and TPM Clear
Device Select
Selecting TPM 1.2 will restrict support to TPM 1.2 devices, TPM 2.0 to TPM 2.0 devices and
Auto will auto-select according to the version of the device installed, with the default set to
TPM 2.0. The options are TPM 1.2, TPM 2.0 and Auto.
CPU Configuration

SMT Mode
Use this setting to specify Simultaneous Multithreading. Options include Off for 1T single
thread and Auto for 2T two-thread if your system is capable of it.
Core Performance Boost
This setting is used to configure for Core Performance Boost. Options include Auto and
Disabled.
Chapter 6: UEFI BIOS 7001
73