Siriusxm Satellite Radio Operations - Clarion FZ502 Owner's Manual & Installation Manual

SiriusXM Satellite Radio Operations

Displaying the Identification (ID)
Code
Before you listen to satellite radio, you must
subscribe to the service using the SiriusXM
Radio ID number.
1. Press the [CONTROL] knob on the front
panel or [SRC / ] button on the remote
control to activate SiriusXM-mode.
2. Press the [CONTROL] knob (left/right) to
select channel "0".
The unit displays Radio ID.
Notes:
1. The Radio ID is located on the bottom of
the SiriusXM Connect Vehicle Tuner.
2. Please note that the SiriusXM Radio ID
does not include the letters I, O, S or F.
3. Activate the SiriusXM Connect Vehicle
Tuner using one of the two methods
below:
• Online: Go to "www.siriusxm.com/
activatenow" and choose ACTIVATE
RADIO.
• Phone: Call 1-800-XM-RADIO (1-800-967-
2346).
Storing Channel Presets
1. Press [BAND/TOP] button on the remote
control or long-press [CONTROL] knob
(up) on the front panel to select the
desired band you want to store the preset
in.
There are 3 Satellite Radio Preset bands.
Each press of [BAND/TOP] button on the
remote control or long-press [CONTROL]
(up) on the front panel changes the band:
SXM1 -> SXM2 -> SXM3 -> SXM1
2. Tune to the desired channel and then
press and hold one of the preset buttons (1
through 6) on the remote control to store
the channel.
3. Repeat the procedure to store up to 5
other channels on to the same band.
Note:
• A total of 18 channels can be stored in the
preset memory, 6 channels for each band
(SXM1,SXM2 and SXM3).
7 FZ502
Tuning Channels using Presets
1. Press [BAND/TOP] on the remote control
or long-press [CONTROL] knob (up) on
the front panel to select the desired band
of Presets you wish to access.
2. Press [CONTROL] knob (up/down) to the
preset buttons (1 through 6) that has your
desired Satellite Radio channel stored in
memory.
Category Browsing
1. Long-press and hold [BAND/TOP] on the
remote control to activate the Category
Browsing mode.
2. Rotate [CONTROL] knob to select desired
category.
3. Press [CONTROL] knob (left/right) to
select desired channel within the selected
Category. You can see channel name,
channel number, artist, title or content by
pressing [DISP] on the remote control.
4. P r e s s [ CONTROL] k n o b t o t u n e t o
selected channel.
Note:
• If no operation is performed for 10
seconds or press [CONTROL] knob (up),
the Category Browsing mode is canceled.
Preset scan
Preset scan receives the stations stored
in preset memory in order. This function is
useful when searching for a desired station in
memory.
1. Press and hold the [PS/AS] button on the
remote control.
2. When a desired station is tuned in, press
the [PS/AS] button on the remote control
again to continue receiving that station.
Channel scan (in current category)
Channel scan receives the channel (in
current category) in order. This function is
useful when searching for a desired channel
in current category.
1. Press the [PS/AS] button on the remote
control.
2. When a desired channel is tuned in, press
the [PS/AS] button on the remote control
again to continue receiving that channel.
SiriusXM Satellite Radio Operations
Note:
• Be careful not to press and hold the
[PS/AS] button on the remote control for
1 second or longer, otherwise the preset
scan function will begin and the unit starts
scaning presets.
Artist & Song Alerts
While listening to SiriusXM Satellite Radio,
you can be alerted when your favorite songs
or artists are playing on other channels. The
radio will display an Alert message when a
matching artist or song is found on another
channel. Then you can choose if you want to
tune to that favorite or you can ignore it and
stay on your current channel. Information
on setting up the Artist and Song alerts is
described below.
1. While listening to favorite song, short-press
[RPT] button on the remote control to add
the artist or long-press [RPT] on the remote
control button to add the song to the "Artist
& Song Alerts" list.
Press and hold [CONTROL] knob (center
long press), and rotate the [CONTROL]
knob to choose ADJUST, then to choose
the SEARCH, and rotate [CONTROL] knob
to select "ALERT LIST".
Rotate and press [CONTROL] knob to
select desired alert item. Then select "ON"
to activate alert, "OFF" to deactivate or
"DELETE" to delete this item. (press and
hold [CONTROL] knob) You can also
activate and deactivate Alert function in
System Setup menu.
Notes:
• You can store up to 50 items for Artist
& Song Alerts. "XU(sed)/YE(mpty)" is
displayed when the new item is stored. X
is the total number of song titles or artist
names stored in memory, and Y is the total
number memory locations still available for
storage.
• If either the artists or song title is not
available, "NO SONG" or "NO ARTIST" will
be displayed.
• If you try to store item when memory is full,
"MEMORY FULL" is displayed. If you want
to store another, please delete exsisting
alert item.
Receiving and Tuning to an Alert
Whenever a stored artist or song is playing
on another channel, alert message "ART
ALERT"or "SNG ALERT" appears on
the unit display.To tune to artist or song
identified by the alert, press [RDM] button on
the remote control.
Notes:
• If no operationg is performed for 5
seconds,the unit returns to normal mode.
• Artist name and Song title which you have
stored and which are currently playing
will be displayed in category called "MY
MUSIC" in search mode.
My Music search
You can access the channels which is
broadcasting the contents in the activated
Alert list.
1. Press and hold [CONTROL] knob (center
long press), and rotate the [CONTROL]
knob to choose ADJUST, then to choose
the SEARCH, and rotate [CONTROL]
knob to select "MY MUSIC LIST".
2. P r e s s [ CONTROL] k n o b t o d i s p l a y
matched songs which are currently
broadcasted
3. Rotate [CONTROL] knob to select desired
song, and press [CONTROL] to tune to
that channel.
Note:
• If there is no matched songs broadcasted,
it displays "MEM EMPTY".
Replay function
The Replay feature allows you to pause,
rewind, and replay up to 30 minutes of live
SiriusXM Satellite Radio.
1. While listening to a SiriusXM channel,
press [ ] on the remote control to enter
Replay mode. The display will show
"PAUSE" when entering this mode.
2. Press [CONTROL] knob (down) or press
] button to resume playback of the
[
stored audio from the point at which it
was paused.
During playback,the SiriusXM Tuner will
continue to store the channel audio until
you exit the Replay mode.