Table of Contents
Advertisement
Notes of installation
1. Before installation, please make sure
proper connections are conducted and
the unit operates normally. Improper
connection may result in damage to
the unit.
2. Use only accessories designed and
manufactured for this unit and other
unauthorized accessories may result in
damage to the unit.
3. Before installation, please fasten all power
cables.
4. DO NOT install the unit in the place where
close to hot area to prevent damage to
electrical components such as the laser
head.
5. Install the unit horizontally. Installing the
unit more than 30 degree vertically may
result in worse performance.
6. To prevent electric spark, connect the
positive pole first and then the negative
pole.
Screwdriver
Dashboard
Mounting Bracket
7. DO NOT block the cooling fan exit to
ensure sufficient heating dissipation
of this unit, or it may result in damage
to this unit.
Unit installation
Method A
1. Insert mounting bracket into dash
board, choose appropriate mounting
tab according to the gap width, bending
the mounting tab outwards with a
screwdriver to fix the mounting bracket
in place.
2. Slide the unit into the bracket until you
hear a click sound.
Method B
M5x6
Dashboard
Mounting Frame
1. Insert this unit directly to the opening of
the dashboard.
2. Place M5×6 cylindrical screw through the
holes of the mounting frame located inside
the opening to holes of the unit and fasten
the screws to left & right.
Trim ring installation
Attach the trim ring around the front panel.
6) Removing the Source Unit
Disassemble trim ring
1. Push the trim ring to right and pull out the
right part.
2. Push the trim ring to left and pull out the
left part.
Disassemble the unit
1. Switch off the power.
2. Remove the trim ring.
3. Insert the removal keys straight back until
they lock,then pull the unit out.
4. Disconnect all the wires.
FZ502
16
Advertisement
Table of Contents
