MTX TR275 Manual page 2

Thank You !
Thank you for purchasing an MTX Audio TR amplifier. Proper installation matched with MTX speakers and subwoofers provide superior sound
and performance for endless hours of waking the neighbors. Congrats and enjoy the ultimate audio experience with MTX !
Specifications :
TR275
Specifications :
• 2-channel Class-AB wide range amplifier
• CEA2006 certified Power Output :
- 2x110W RMS @2Ω and THD+N ≤1%
- 2x75W RMS @4Ω and THD+N ≤1%
- 1x220W RMS bridged @4Ω and THD+N ≤1%
• Crossover :
- High pass 12dB/oct 80Hz
- Low pass 12dB/oct 80Hz
• Signal-to-Noise Ratio (1 Watt) : > 74dB
• THD+Noise (Distortion) (1 Watt) : ≤ 0,18%
• Frequency Response (±1dB) : 10Hz-60000Hz
• Maximum Input Signal : 6V
• Maximum Sensitivity : 200mV
• Dimensions : 142x134x51mm
• High level inputs
• Optional EBC remote control (EBC-1)
Settings, Power and Speaker connections :
TR275
TR450
RCA Inputs (Input) : These RCA inputs are used with source units that have RCA or Line level outputs. (Source units need a minimum level of
200mV output for proper operation of the amplifier).
MTX recommends only high quality twisted pair cables (such as MTX ZNX) to decrease the possibility of radiated noise entering the system.
Gain Control (Gain) : The gain control matches the input sensitivity of the amplifier to the source unit being used. The operating range varies
from 200mv to 6V.
TR450
Specifications :
• 4-Channel Class-AB wide range amplifier
• CEA2006 certified Power Output :
- 4x75W RMS @2Ω and THD+N ≤1%
- 4x50W RMS @4Ω and THD+N ≤1%
- 2x150W RMS bridged @4Ω and THD+N ≤1%
• Crossover :
- High pass 12dB/oct 80Hz
- Low pass 12dB/oct 80Hz
• Signal-to-Noise Ratio (1 Watt) : > 73dB
• THD+Noise (Distortion) (1 Watt) : ≤ 0,2%
• Frequency Response (±1dB) : 10Hz-60000Hz
• Maximum Input Signal : 6V
• Maximum Sensitivity : 200mV
• Dimensions : 182x134x51mm
• High level inputs
• Optional EBC remote control (EBC-1)