Devolo Magic 2 Wifi Next; Changing The Network Password; Establish A Wi-Fi Connection With The Devolo Magic 2 Wifi Next - Devolo Magic 2 WiFi next Manual

Hide thumbs Also See for Magic 2 WiFi next:
Table of Contents

Advertisement

25 Initial use
3.3.2Addition – Expanding an existing
PLC network by adding another

devolo Magic 2 WiFi next

Before you can use the devolo Magic 2 WiFi next
in your devolo Magic network, first you have to
connect it to your existing devolo Magic adapters
as a network. This is accomplished by using a sha-
red password.
1
Plug the devolo Magic 2 WiFi next
available power socket. As soon as the LED
flashes
0.5 seconds, the adapter is ready to operate
but not yet integrated into a devolo Magic
network (see Chapter 2.3.1 Reading the PLC
indicator light).
2
Within 3 minutes, press the PLC button on a
devolo Magic
devolo Magic network for approximately 1 sec.
The new devolo Magic adapter pairs automati-
cally so no button needs to be pressed. The LED
of this adapter now also flashes white.
If the LEDs light up white on both
devolo Magic adapters, the new adapter
has been successfully integrated into your
existing devolo Magic network.
devolo Magic 2 WiFi next
white
at
regular
intervals
adapter
in
your
For each pairing operation, only one additional
adapter can be added at a time.

3.3.3 Changing the network password

A network password can also be changed in the
following ways:
b
Using the web interface of the devolo Magic
adapter (see Chapter 4.5 Powerline)
into an
or
b
Using
of
devolo Home Network App. For more infor-
mation, refer to the chapter. 3.4 Installation of
devolo software
3.3.4 Establish a Wi-Fi connection with
the devolo Magic 2 WiFi next
existing
Establish the Wi-Fi connection with your laptop,
tablet or smartphone by entering the previously
noted WiFi key as the network security key.
Integrate the Wi-Fi adapter into an existing Wi-
Fi network
To ensure that the devolo Magic 2 WiFi next has
the same Wi-Fi configuration as your Wi-Fi router,
you can apply the Wi-Fi access data at the touch of
a button using the WiFi Clone function. This can
be enabled in different ways:
devolo Cockpit
or
the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents